Yes you can! Both Waters provide their own set of benefits. Devices like HydroLite chemically alter water by infusing it with hydrogen, as opposed to Analemma, which works on an energetic level, changing the way water molecules behave in relation to each other. Analemma introduces coherent, organised behaviour, without affecting the chemical content of the water. We usually recommend using Analemma as the final treatment, after all the “chemical” steps and procedures (e.g. purification, distillation, ionization, electrolysis…).

Analemma is not a water filter. Analemma is best used alongside of a water filter and where possible, treating your water with Analemma products should be the last treatment of your water with any of our devices. This would mean filtering, Hydrogenating, treating with a water softener etc. Analemma would be used as the last treatment if at all possible. However this is not always possible and so ways around this can be found on our FAQ question "I have a Water Filter unit or Water Softener installed – can the whole house unit be combined with my water filter unit?"

Filtering affects the physical state of water but doesn’t change its chemical content. However, to further increase the quality of your drinking water, we recommend using Analemma on post-filtered water whenever possible.

Filtering your water extracts the physical toxins such as heavy metals, hormones and microplastics however, the energetic value of these toxins (think of it as the toxic DNA) remains in the post-filtered water for your consumption. A horrific thought as your body is still consuming all the data and information that these toxins hold.

By using your Analemma device, it will neutralise the nasties in your water AND structure your water into a PERMANENTLY Super Charged Full Spectrum Coherent State - bringing the left and right side hemispheres of your brain to coherence within 10 minutes of drinking as well as structuring every water cell in your body, bringing coherence and harmony to mind, Body & Soul.

The “mother water” is the full-spectrum coherent water that is filled into all Aǹalemma products. The mother water is created through a five-stage process that spans a period of one year. In brief, the water starts out as regular, clean water, purified from chemical and biological contamination. It then undergoes a physical procedure that resembles the natural movements and cycles of water in nature. Through this process, the mother water is brought into a highly ordered physical state that can be transferred to surrounding water molecules through direct physical exposure (such as stirring regular water with the Aǹalemma wand).

When you stir regular water with the Aǹalemma wand, the coherent configuration of the “mother water” contained inside the vial is successfully copied to surrounding water molecules. For this to work, the vial had to be designed in a specific way. During development, we tried out numerous materials before we found that quartz has a specific physical composition which allows a seamless transfer of energy between the inside and outside of the vial. This is the main reason the wand is so fragile – the vial had to be made ultra thin so it doesn’t disrupt the transference process.

As of yet, Analemma water seems to hold its coherent state indefinitely. Our most recent testing was done on water that was treated with just one treatment 7 YEARS ago, and it still hold its Full Spectrum Coherent Structure.

As yet, Analemma is the ONLY Product Worldwide that has been able to achieve this!

Whilst other structuring products will structure water - they typically only hold their structure for between 1.5 seconds and 2.5 days giving little to no benefit to the consumer.

The direction of swirling does not influence the functionality of the Aǹalemma wand. We tested both the speed and the direction of swirling and neither parameter had influence on the coherent state.

Aǹalemma-treated water won’t make regular water coherent in the same way that “mother water” does. Once you combine regular and coherent water, you should re-stir the new body of water to ensure it is sufficiently treated. To do that, it’s best to follow our standard stirring formula. For example, if you add 35 oz (1 L) of regular water to your coherent water, you should stir for at least one more minute.

No. We tested the coherence of Aǹalemma-treated water inside our wands when exposed to different sources of radiation, such as radiofrequency radiation (emitted by mobile phones, computers and similar electric devices), microwave radiation, visible light, UV and short-lasting X-ray radiation. Regardless of the type of radiation, exposure to different electromagnetic waves did not affect the coherence of Aǹalemma water inside the vial.

Our main test is an indirect biological assay based on biophoton emission of germinating plant seeds. Our early research showed that coherent water will produce a specific biophoton emission curve that differs from a curve produced by regular water. Since Aǹalemma water was originally created as a side-product of biophoton research, this remains our most reliable indirect assay for quickly measuring the changes in water.

Biophoton emission is tested using highly sensitive charge-coupled cameras. For our standardised tests, we are analysing the biophoton emission curves produced by plant seeds during germination. Seed germination requires only water and light, so by keeping the light exactly the same, and changing only the water, we can assess the changes in the water by measuring the difference in metabolic activity of the seeds.

It’s important to note that water coherence is part of an emerging scientific field, and there are currently no standardised tests for directly measuring the coherence of water using conventional technology. We used various tests to measure the size of coherent domains in Aǹalemma water, such as Raman, UV/VIS and NIR spectroscopy (also known as aquaphotomics) and temperature perturbations. However, these tests did not offer a sufficient level of reproducibility to be used for QA

Analemma water stands out due to its stability. While other structured waters lose their structure within hours, Analemma water maintains its coherence for years after just one treatment.

Yes, Aǹalemma can be used with any kind of room-temperature drinkable liquid. The same applies to mineral water, spring water, filtered water, etc.

We do not recommend immersing the Aǹalemma wand in any hot liquids as this can lead to breakage of the highly delicate crystal vial. However, you can still prepare your favorite tea or coffee by using pre-treated coherent water. This process will not have a permanent effect on the coherent state, so enjoy your hot beverage without any worries.

Absolutely! Using coherent water for cooking can enhance the quality of your meals. Treat room-temperature water with the Analemma wand before use.

Yes, you can use Aǹalemma on any room-temperature drinkable liquid. As long as it contains water, Aǹalemma will have an effect on it. To keep the wand in mint condition, make sure to rinse it with warm water after this type of use to wash off any remaining organic particles.

Heating or freezing will not permanently affect the coherent state of Aǹalemma water. At temperatures above 149 degrees Fahrenheit (65 degrees Celsius), the coherent structure will be temporarily distorted due to natural fluctuations in water molecules’ behaviour, however, our tests have confirmed that the coherent structure is efficiently restored when the water cools down.

You can store coherent water in any type of container you would normally use. We tested all the most commonly used materials (glass, plastic, steel, copper, clay) and found no difference in the coherent structure.

Yes, this is more than recommended. Our research showed multiple benefits of Aǹalemma water on plant vitality, soil quality and the energy storage capacity of fruits. Additionally, our most recent study on basil plants indicated protective effects of Aǹalemma water on essential processes like respiration and photosynthesis even during drought.

Yes, these can be symptoms of a toxin release from your body. These should be gone in a few days. This is why consistent use of Analemma is so important so that the positive effects really build up over time.

Symptoms like this can occur but do not happen to everyone. If concerned please consult your physician however, this would normally occur when your body is purging build up of toxins.

So far, Aǹalemma water has managed to keep its structured state indefinitely. In our latest tests, we looked at water treated six years ago, and it has still maintained its coherent form. If you treated your water a few days ago, it will most definitely still keep its coherence.

In this case, whichever option you choose is good! The leftover water in the jar will still hold its coherence. Plants LOVE Aǹalemma Water too so either choice would be fine.

Bathing in Aǹalemma Water can help increase your cellular energy and even enhance the absorption of nutrients already in your system. It also helps feed your skin bacteria with the highest quality water there is.

We are currently conducting a study on the benefits of bathing in Aǹalemma Water. More information about the study will be available soon but so far the results are looking amazing!

According to our tests, as coherent water heats up, this will cause a disturbance in the structure. However, as the water cools down to temperatures below -150° Fahrenheit (65°C), its coherence will be restored. This means that you can get the same benefits of coherent water in its cooled down form that you would get from room-temperature coherent water. This also means that if you were to consume a hot drink, once it has cooled inside your body it will once again become coherent and structured so your body would still reap the massive benefits.

There wouldn't be much of a difference as treated water will remain coherent in all of these. Naturally, we do not recommend storing water in bottles/cups that contain harmful chemicals like BPA. However, this is just general advice, it's not something that will affect the coherent form or structure.

The “mother water” is created through a five-stage process that spans over a period of one year, with the aim of altering the physical state of water. This water has such a powerful, dominant frequency, that it inevitably affects the configuration of any water molecules that come in direct contact with it.

Water molecules tend to mimic the atomic structure of the dominant frequency. Since the Analemma mother water inside the Analemma device has incredibly powerful frequency, stability and structure, all of the H2O molecules that come into close proximity to it, start forming the same structure.

No, Analemma does not change the PH Value of the Water.